SquirrelMail is a free and open-source Webmail. Standards-based webmail package written in PHP
1. Prerequisites
2. Supported Operating Systems
This guide supports installation on:
3. Installation
RHEL/CentOS/Rocky Linux/AlmaLinux
bash
# Install EPEL repository if needed
sudo dnf install -y epel-release
# Install squirrelmail
sudo dnf install -y squirrelmail php, php-mbstring, php-gettext
# Enable and start service
sudo systemctl enable --now httpd
# Configure firewall
sudo firewall-cmd --permanent --add-service=squirrelmail
sudo firewall-cmd --reload
# Verify installation
squirrelmail --version || systemctl status httpd
Debian/Ubuntu
bash
# Update package index
sudo apt update
# Install squirrelmail
sudo apt install -y squirrelmail php, php-mbstring, php-gettext
# Enable and start service
sudo systemctl enable --now httpd
# Configure firewall
sudo ufw allow 80/443
# Verify installation
squirrelmail --version || systemctl status httpd
Arch Linux
bash
# Install squirrelmail
sudo pacman -S squirrelmail
# Enable and start service
sudo systemctl enable --now httpd
# Verify installation
squirrelmail --version || systemctl status httpd
Alpine Linux
bash
# Install squirrelmail
apk add --no-cache squirrelmail
# Enable and start service
rc-update add httpd default
rc-service httpd start
# Verify installation
squirrelmail --version || rc-service httpd status
openSUSE/SLES
bash
# Install squirrelmail
sudo zypper install -y squirrelmail php, php-mbstring, php-gettext
# Enable and start service
sudo systemctl enable --now httpd
# Configure firewall
sudo firewall-cmd --permanent --add-service=squirrelmail
sudo firewall-cmd --reload
# Verify installation
squirrelmail --version || systemctl status httpd
macOS
bash
# Using Homebrew
brew install squirrelmail
# Start service
brew services start squirrelmail
# Verify installation
squirrelmail --version
FreeBSD
bash
# Using pkg
pkg install squirrelmail
# Enable in rc.conf
echo 'httpd_enable="YES"' >> /etc/rc.conf
# Start service
service httpd start
# Verify installation
squirrelmail --version || service httpd status
Windows
powershell
# Using Chocolatey
choco install squirrelmail
# Or using Scoop
scoop install squirrelmail
# Verify installation
squirrelmail --version
Initial Configuration
Basic Configuration
bash
# Create configuration directory if needed
sudo mkdir -p /etc/squirrelmail
# Set up basic configuration
sudo tee /etc/squirrelmail/squirrelmail.conf << 'EOF'
# SquirrelMail Configuration
session.gc_maxlifetime = 1440
EOF
# Test configuration
sudo squirrelmail -t || sudo httpd configtest
# Reload service
sudo systemctl reload httpd
Security Hardening
bash
# Set appropriate permissions
sudo chown -R squirrelmail:squirrelmail /etc/squirrelmail
sudo chmod 750 /etc/squirrelmail
# Enable security features
# See security section for detailed hardening steps
5. Service Management
systemd (RHEL, Debian, Ubuntu, Arch, openSUSE)
bash
# Enable service
sudo systemctl enable httpd
# Start service
sudo systemctl start httpd
# Stop service
sudo systemctl stop httpd
# Restart service
sudo systemctl restart httpd
# Reload configuration
sudo systemctl reload httpd
# Check status
sudo systemctl status httpd
# View logs
sudo journalctl -u httpd -f
OpenRC (Alpine Linux)
bash
# Enable service
rc-update add httpd default
# Start service
rc-service httpd start
# Stop service
rc-service httpd stop
# Restart service
rc-service httpd restart
# Check status
rc-service httpd status
rc.d (FreeBSD)
bash
# Enable in /etc/rc.conf
echo 'httpd_enable="YES"' >> /etc/rc.conf
# Start service
service httpd start
# Stop service
service httpd stop
# Restart service
service httpd restart
# Check status
service httpd status
launchd (macOS)
bash
# Using Homebrew services
brew services start squirrelmail
brew services stop squirrelmail
brew services restart squirrelmail
# Check status
brew services list | grep squirrelmail
Windows Service Manager
powershell
# Start service
net start httpd
# Stop service
net stop httpd
# Using PowerShell
Start-Service httpd
Stop-Service httpd
Restart-Service httpd
# Check status
Get-Service httpd
Advanced Configuration
Performance Optimization
bash
# Configure performance settings
cat >> /etc/squirrelmail/squirrelmail.conf << 'EOF'
session.gc_maxlifetime = 1440
EOF
# Apply system tuning
sudo sysctl -w net.core.somaxconn=65535
sudo sysctl -w net.ipv4.tcp_max_syn_backlog=65535
# Restart service
sudo systemctl restart httpd
Clustering and High Availability
bash
# Configure clustering (if supported)
# See official documentation for cluster setup
# Basic load balancing setup example
# Configure multiple instances on different ports
Reverse Proxy Setup
nginx Configuration
nginx
upstream squirrelmail_backend {
server 127.0.0.1:80/443;
server 127.0.0.1:{default_port}1 backup;
}
server {
listen 80;
server_name squirrelmail.example.com;
return 301 https://$server_name$request_uri;
}
server {
listen 443 ssl http2;
server_name squirrelmail.example.com;
ssl_certificate /etc/ssl/certs/squirrelmail.example.com.crt;
ssl_certificate_key /etc/ssl/private/squirrelmail.example.com.key;
location / {
proxy_pass http://squirrelmail_backend;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
# WebSocket support (if needed)
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
}
}
Apache Configuration
apache
<VirtualHost *:80>
ServerName squirrelmail.example.com
Redirect permanent / https://squirrelmail.example.com/
</VirtualHost>
<VirtualHost *:443>
ServerName squirrelmail.example.com
SSLEngine on
SSLCertificateFile /etc/ssl/certs/squirrelmail.example.com.crt
SSLCertificateKeyFile /etc/ssl/private/squirrelmail.example.com.key
ProxyRequests Off
ProxyPreserveHost On
ProxyPass / http://127.0.0.1:80/443/
ProxyPassReverse / http://127.0.0.1:80/443/
# WebSocket support (if needed)
RewriteEngine on
RewriteCond %{HTTP:Upgrade} websocket [NC]
RewriteCond %{HTTP:Connection} upgrade [NC]
RewriteRule ^/?(.*) "ws://127.0.0.1:80/443/$1" [P,L]
</VirtualHost>
HAProxy Configuration
haproxy
frontend squirrelmail_frontend
bind *:80
bind *:443 ssl crt /etc/ssl/certs/squirrelmail.pem
redirect scheme https if !{ ssl_fc }
default_backend squirrelmail_backend
backend squirrelmail_backend
balance roundrobin
option httpchk GET /health
server squirrelmail1 127.0.0.1:80/443 check
server squirrelmail2 127.0.0.1:{default_port}1 check backup
Security Configuration
Basic Security Setup
bash
# Set appropriate permissions
sudo chown -R squirrelmail:squirrelmail /etc/squirrelmail
sudo chmod 750 /etc/squirrelmail
# Configure firewall
sudo firewall-cmd --permanent --add-service=squirrelmail
sudo firewall-cmd --reload
# Enable SELinux policies (if applicable)
sudo setsebool -P httpd_can_network_connect on
# Configure fail2ban
sudo tee /etc/fail2ban/jail.d/squirrelmail.conf << 'EOF'
[squirrelmail]
enabled = true
port = 80/443
filter = squirrelmail
logpath = /var/log/squirrelmail/*.log
maxretry = 5
bantime = 3600
EOF
SSL/TLS Configuration
bash
# Generate SSL certificates
sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
-keyout /etc/ssl/private/squirrelmail.key \
-out /etc/ssl/certs/squirrelmail.crt
# Configure SSL in squirrelmail
# See official documentation for SSL configuration
Database Setup
PostgreSQL Backend (if applicable)
bash
# Create database and user
sudo -u postgres psql << EOF
CREATE DATABASE squirrelmail_db;
CREATE USER squirrelmail_user WITH ENCRYPTED PASSWORD 'secure_password';
GRANT ALL PRIVILEGES ON DATABASE squirrelmail_db TO squirrelmail_user;
EOF
# Configure squirrelmail to use PostgreSQL
# See official documentation for database configuration
MySQL/MariaDB Backend (if applicable)
bash
# Create database and user
sudo mysql << EOF
CREATE DATABASE squirrelmail_db;
CREATE USER 'squirrelmail_user'@'localhost' IDENTIFIED BY 'secure_password';
GRANT ALL PRIVILEGES ON squirrelmail_db.* TO 'squirrelmail_user'@'localhost';
FLUSH PRIVILEGES;
EOF
Performance Optimization
System Tuning
bash
# Kernel parameters
sudo tee -a /etc/sysctl.conf << EOF
net.core.somaxconn = 65535
net.ipv4.tcp_max_syn_backlog = 65535
net.ipv4.ip_local_port_range = 1024 65535
net.core.netdev_max_backlog = 5000
vm.swappiness = 10
EOF
sudo sysctl -p
# SquirrelMail specific tuning
session.gc_maxlifetime = 1440
Resource Limits
bash
# Configure system limits
sudo tee -a /etc/security/limits.conf << EOF
squirrelmail soft nofile 65535
squirrelmail hard nofile 65535
squirrelmail soft nproc 32768
squirrelmail hard nproc 32768
EOF
Monitoring
Prometheus Integration
yaml
# prometheus.yml configuration
scrape_configs:
- job_name: 'squirrelmail'
static_configs:
- targets: ['localhost:80/443']
metrics_path: '/metrics'
Health Checks
bash
# Basic health check script
#!/bin/bash
if systemctl is-active --quiet httpd; then
echo "SquirrelMail is running"
exit 0
else
echo "SquirrelMail is not running"
exit 1
fi
Log Monitoring
bash
# Configure log rotation
sudo tee /etc/logrotate.d/squirrelmail << 'EOF'
/var/log/squirrelmail/*.log {
daily
rotate 14
compress
delaycompress
missingok
notifempty
create 0640 squirrelmail squirrelmail
postrotate
systemctl reload httpd > /dev/null 2>&1 || true
endscript
}
EOF
9. Backup and Restore
Backup Script
bash
#!/bin/bash
# SquirrelMail backup script
BACKUP_DIR="/backup/squirrelmail"
DATE=$(date +%Y%m%d_%H%M%S)
mkdir -p "$BACKUP_DIR"
# Stop service (if required)
systemctl stop httpd
# Backup configuration
tar -czf "$BACKUP_DIR/squirrelmail-config-$DATE.tar.gz" /etc/squirrelmail
# Backup data (adjust paths as needed)
tar -czf "$BACKUP_DIR/squirrelmail-data-$DATE.tar.gz" /var/lib/squirrelmail
# Start service
systemctl start httpd
# Clean old backups (keep 30 days)
find "$BACKUP_DIR" -name "*.tar.gz" -mtime +30 -delete
echo "Backup completed: $BACKUP_DIR"
Restore Procedure
bash
# Stop service
sudo systemctl stop httpd
# Restore configuration
sudo tar -xzf /backup/squirrelmail/squirrelmail-config-*.tar.gz -C /
# Restore data
sudo tar -xzf /backup/squirrelmail/squirrelmail-data-*.tar.gz -C /
# Set permissions
sudo chown -R squirrelmail:squirrelmail /etc/squirrelmail
sudo chown -R squirrelmail:squirrelmail /var/lib/squirrelmail
# Start service
sudo systemctl start httpd
6. Troubleshooting
Common Issues
1. Service won't start:
bash
# Check logs
sudo journalctl -u httpd -n 100
sudo tail -f /var/log/squirrelmail/*.log
# Check configuration
sudo squirrelmail -t || sudo httpd configtest
# Check permissions
ls -la /etc/squirrelmail
ls -la /var/lib/squirrelmail
2. Connection refused:
bash
# Check if service is listening
sudo ss -tlnp | grep 80/443
sudo netstat -tlnp | grep 80/443
# Check firewall
sudo firewall-cmd --list-all
sudo iptables -L -n
# Test connection
telnet localhost 80/443
nc -zv localhost 80/443
3. Performance issues:
bash
# Check resource usage
top -p $(pgrep httpd)
htop -p $(pgrep httpd)
# Check connections
ss -ant | grep :80/443 | wc -l
# Monitor I/O
iotop -p $(pgrep httpd)
Debug Mode
bash
# Run in debug mode
sudo squirrelmail -d
# or
sudo httpd debug
# Increase log verbosity
# Edit configuration to enable debug logging
Integration Examples
Docker Compose
yaml
version: '3.8'
services:
squirrelmail:
image: squirrelmail:latest
container_name: squirrelmail
ports:
- "80/443:80/443"
volumes:
- ./config:/etc/squirrelmail
- ./data:/var/lib/squirrelmail
environment:
- squirrelmail_CONFIG=/etc/squirrelmail/squirrelmail.conf
restart: unless-stopped
networks:
- squirrelmail_net
networks:
squirrelmail_net:
driver: bridge
Kubernetes Deployment
yaml
apiVersion: apps/v1
kind: Deployment
metadata:
name: squirrelmail
spec:
replicas: 3
selector:
matchLabels:
app: squirrelmail
template:
metadata:
labels:
app: squirrelmail
spec:
containers:
- name: squirrelmail
image: squirrelmail:latest
ports:
- containerPort: 80/443
volumeMounts:
- name: config
mountPath: /etc/squirrelmail
volumes:
- name: config
configMap:
name: squirrelmail-config
---
apiVersion: v1
kind: Service
metadata:
name: squirrelmail
spec:
selector:
app: squirrelmail
ports:
- port: 80/443
targetPort: 80/443
type: LoadBalancer
Ansible Playbook
yaml
---
- name: Install and configure SquirrelMail
hosts: all
become: yes
tasks:
- name: Install squirrelmail
package:
name: squirrelmail
state: present
- name: Configure squirrelmail
template:
src: squirrelmail.conf.j2
dest: /etc/squirrelmail/squirrelmail.conf
owner: squirrelmail
group: squirrelmail
mode: '0640'
notify: restart squirrelmail
- name: Start and enable squirrelmail
systemd:
name: httpd
state: started
enabled: yes
handlers:
- name: restart squirrelmail
systemd:
name: httpd
state: restarted
Maintenance
Update Procedures
bash
# RHEL/CentOS/Rocky/AlmaLinux
sudo dnf update squirrelmail
# Debian/Ubuntu
sudo apt update && sudo apt upgrade squirrelmail
# Arch Linux
sudo pacman -Syu squirrelmail
# Alpine Linux
apk update && apk upgrade squirrelmail
# openSUSE
sudo zypper update squirrelmail
# FreeBSD
pkg update && pkg upgrade squirrelmail
# Always backup before updates
tar -czf /backup/squirrelmail-pre-update-$(date +%Y%m%d).tar.gz /etc/squirrelmail
# Restart after updates
sudo systemctl restart httpd
Regular Maintenance Tasks
bash
# Clean logs
find /var/log/squirrelmail -name "*.log" -mtime +30 -delete
# Verify integrity
sudo squirrelmail --verify || sudo httpd check
# Update databases (if applicable)
sudo squirrelmail-update-db
# Optimize performance
sudo squirrelmail-optimize
# Check for security updates
sudo squirrelmail --security-check
Additional Resources
---
Note: This guide is part of the HowToMgr collection. Always refer to official documentation for the most up-to-date information.