openproject Installation Guide Installation Guide

openproject is a free and open-source web-based project management system. OpenProject offers comprehensive project management with Gantt charts, agile boards, and time tracking, serving as an alternative to Microsoft Project or Jira

Hardware Requirements:

CPU: 2+ cores recommended

RAM: 4GB minimum (8GB+ recommended)

Storage: 10GB for application and data

Network: HTTPS for web access

Operating System:

Linux: Any modern distribution (RHEL, Debian, Ubuntu, CentOS, Fedora, Arch, Alpine, openSUSE)

macOS: 10.14+ (Mojave or newer)

Windows: Windows Server 2016+ or Windows 10

FreeBSD: 11.0+

Network Requirements:

Port 80/443 (default openproject port)

Port 3000 for development

Dependencies:

See official documentation for specific requirements

System Access: root or sudo privileges required

This guide supports installation on:

RHEL 8/9 and derivatives (CentOS Stream, Rocky Linux, AlmaLinux)

Debian 11/12

Ubuntu 20.04/22.04/24.04 LTS

Arch Linux (rolling release)

Alpine Linux 3.18+

openSUSE Leap 15.5+ / Tumbleweed

SUSE Linux Enterprise Server (SLES) 15+

macOS 12+ (Monterey and later)

FreeBSD 13+

Windows 10/11/Server 2019+ (where applicable)

bash

# Install EPEL repository if needed
sudo dnf install -y epel-release

# Install openproject
sudo dnf install -y openproject

# Enable and start service
sudo systemctl enable --now openproject

# Configure firewall
sudo firewall-cmd --permanent --add-port=80/443/tcp
sudo firewall-cmd --reload

# Verify installation
openproject --version

bash

# Update package index
sudo apt update

# Install openproject
sudo apt install -y openproject

# Enable and start service
sudo systemctl enable --now openproject

# Configure firewall
sudo ufw allow 80/443

# Verify installation
openproject --version

bash

# Install openproject
sudo pacman -S openproject

# Enable and start service
sudo systemctl enable --now openproject

# Verify installation
openproject --version

bash

# Install openproject
apk add --no-cache openproject

# Enable and start service
rc-update add openproject default
rc-service openproject start

# Verify installation
openproject --version

bash

# Install openproject
sudo zypper install -y openproject

# Enable and start service
sudo systemctl enable --now openproject

# Configure firewall
sudo firewall-cmd --permanent --add-port=80/443/tcp
sudo firewall-cmd --reload

# Verify installation
openproject --version

bash

# Using Homebrew
brew install openproject

# Start service
brew services start openproject

# Verify installation
openproject --version

bash

# Using pkg
pkg install openproject

# Enable in rc.conf
echo 'openproject_enable="YES"' >> /etc/rc.conf

# Start service
service openproject start

# Verify installation
openproject --version

bash

# Using Chocolatey
choco install openproject

# Or using Scoop
scoop install openproject

# Verify installation
openproject --version

bash

# Create configuration directory
sudo mkdir -p /etc/openproject

# Set up basic configuration
# See official documentation for detailed configuration options

# Test configuration
openproject --version

bash

# Enable service
sudo systemctl enable openproject

# Start service
sudo systemctl start openproject

# Stop service
sudo systemctl stop openproject

# Restart service
sudo systemctl restart openproject

# Check status
sudo systemctl status openproject

# View logs
sudo journalctl -u openproject -f

bash

# Enable service
rc-update add openproject default

# Start service
rc-service openproject start

# Stop service
rc-service openproject stop

# Restart service
rc-service openproject restart

# Check status
rc-service openproject status

bash

# Enable in /etc/rc.conf
echo 'openproject_enable="YES"' >> /etc/rc.conf

# Start service
service openproject start

# Stop service
service openproject stop

# Restart service
service openproject restart

# Check status
service openproject status

bash

# Using Homebrew services
brew services start openproject
brew services stop openproject
brew services restart openproject

# Check status
brew services list | grep openproject

powershell

# Start service
net start openproject

# Stop service
net stop openproject

# Using PowerShell
Start-Service openproject
Stop-Service openproject
Restart-Service openproject

# Check status
Get-Service openproject

See the official documentation for advanced configuration options.

nginx

upstream openproject_backend {
    server 127.0.0.1:80/443;
}

server {
    listen 80;
    server_name openproject.example.com;
    return 301 https://$server_name$request_uri;
}

server {
    listen 443 ssl http2;
    server_name openproject.example.com;

    ssl_certificate /etc/ssl/certs/openproject.example.com.crt;
    ssl_certificate_key /etc/ssl/private/openproject.example.com.key;

    location / {
        proxy_pass http://openproject_backend;
        proxy_set_header Host $host;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-Forwarded-Proto $scheme;
    }
}

apache

<VirtualHost *:80>
    ServerName openproject.example.com
    Redirect permanent / https://openproject.example.com/
</VirtualHost>

<VirtualHost *:443>
    ServerName openproject.example.com
    
    SSLEngine on
    SSLCertificateFile /etc/ssl/certs/openproject.example.com.crt
    SSLCertificateKeyFile /etc/ssl/private/openproject.example.com.key
    
    ProxyRequests Off
    ProxyPreserveHost On
    
    ProxyPass / http://127.0.0.1:80/443/
    ProxyPassReverse / http://127.0.0.1:80/443/
</VirtualHost>

haproxy

frontend openproject_frontend
    bind *:80
    bind *:443 ssl crt /etc/ssl/certs/openproject.pem
    redirect scheme https if !{ ssl_fc }
    default_backend openproject_backend

backend openproject_backend
    balance roundrobin
    server openproject1 127.0.0.1:80/443 check

bash

# Set appropriate permissions
sudo chown -R openproject:openproject /etc/openproject
sudo chmod 750 /etc/openproject

# Configure firewall
sudo firewall-cmd --permanent --add-port=80/443/tcp
sudo firewall-cmd --reload

# Enable SELinux policies (if applicable)
sudo setsebool -P httpd_can_network_connect on

See official documentation for database configuration requirements.

bash

# Basic system tuning
echo 'net.core.somaxconn = 65535' | sudo tee -a /etc/sysctl.conf
echo 'net.ipv4.tcp_max_syn_backlog = 65535' | sudo tee -a /etc/sysctl.conf
sudo sysctl -p

bash

# Check service status
sudo systemctl status openproject

# View logs
sudo journalctl -u openproject -f

# Monitor resource usage
top -p $(pgrep openproject)

bash

#!/bin/bash
# Basic backup script
BACKUP_DIR="/backup/openproject"
DATE=$(date +%Y%m%d_%H%M%S)

mkdir -p "$BACKUP_DIR"
tar -czf "$BACKUP_DIR/openproject-backup-$DATE.tar.gz" /etc/openproject /var/lib/openproject

echo "Backup completed: $BACKUP_DIR/openproject-backup-$DATE.tar.gz"

bash

# Stop service
sudo systemctl stop openproject

# Restore from backup
tar -xzf /backup/openproject/openproject-backup-*.tar.gz -C /

# Start service
sudo systemctl start openproject

1. Service won't start:

bash

# Check logs
sudo journalctl -u openproject -n 100
sudo tail -f /var/log/openproject/openproject.log

# Check configuration
openproject --version

# Check permissions
ls -la /etc/openproject

2. Connection issues:

bash

# Check if service is listening
sudo ss -tlnp | grep 80/443

# Test connectivity
telnet localhost 80/443

# Check firewall
sudo firewall-cmd --list-all

3. Performance issues:

bash

# Check resource usage
top -p $(pgrep openproject)

# Check disk I/O
iotop -p $(pgrep openproject)

# Check connections
ss -an | grep 80/443

yaml

version: '3.8'
services:
  openproject:
    image: openproject:latest
    ports:
      - "80/443:80/443"
    volumes:
      - ./config:/etc/openproject
      - ./data:/var/lib/openproject
    restart: unless-stopped

Maintenance

bash

# RHEL/CentOS/Rocky/AlmaLinux
sudo dnf update openproject

# Debian/Ubuntu
sudo apt update && sudo apt upgrade openproject

# Arch Linux
sudo pacman -Syu openproject

# Alpine Linux
apk update && apk upgrade openproject

# openSUSE
sudo zypper update openproject

# FreeBSD
pkg update && pkg upgrade openproject

# Always backup before updates
tar -czf /backup/openproject-pre-update-$(date +%Y%m%d).tar.gz /etc/openproject

# Restart after updates
sudo systemctl restart openproject

Regular Maintenance

bash

# Log rotation
sudo logrotate -f /etc/logrotate.d/openproject

# Clean old logs
find /var/log/openproject -name "*.log" -mtime +30 -delete

# Check disk usage
du -sh /var/lib/openproject

Official Documentation: https://docs.openproject.org/

GitHub Repository: https://github.com/openproject/openproject

Community Forum: https://forum.openproject.org/

Best Practices Guide: https://docs.openproject.org/best-practices

---

Note: This guide is part of the HowToMgr collection. Always refer to official documentation for the most up-to-date information.

1. Prerequisites

2. Supported Operating Systems

3. Installation

RHEL/CentOS/Rocky Linux/AlmaLinux

Debian/Ubuntu

Arch Linux

Alpine Linux

openSUSE/SLES

macOS

FreeBSD

Windows

Initial Configuration

Basic Configuration

5. Service Management

systemd (RHEL, Debian, Ubuntu, Arch, openSUSE)

OpenRC (Alpine Linux)

rc.d (FreeBSD)

launchd (macOS)

Windows Service Manager

Advanced Configuration

Reverse Proxy Setup

nginx Configuration

Apache Configuration

HAProxy Configuration

Security Configuration

Basic Security Setup

Database Setup

Performance Optimization

System Tuning

Monitoring

Basic Monitoring

9. Backup and Restore

Backup Script

Restore Procedure

6. Troubleshooting

Common Issues

Integration Examples

Docker Compose Example

Maintenance

Update Procedures

Regular Maintenance

Additional Resources

Related Miscellaneous Guides

ackee Installation Guide

Appwrite Installation Guide

arangodb Installation Guide