Zimbra Installation Guide Installation Guide

Zimbra is a free and open-source Collaboration Suite. An open-source collaborative software suite

Hardware Requirements:

CPU: 2 cores minimum (4+ cores recommended)

RAM: 2GB minimum (4GB+ recommended)

Storage: 1GB for installation

Network: 443/7071 ports

Operating System:

Linux: Any modern distribution (RHEL, Debian, Ubuntu, CentOS, Fedora, Arch, Alpine, openSUSE)

macOS: 10.14+ (Mojave or newer)

Windows: Windows Server 2016+ or Windows 10

FreeBSD: 11.0+

Network Requirements:

Port 443/7071 (default zimbra port)

Dependencies:

perl, sysstat, sqlite

System Access: root or sudo privileges required

This guide supports installation on:

RHEL 8/9 and derivatives (CentOS Stream, Rocky Linux, AlmaLinux)

Debian 11/12

Ubuntu 20.04/22.04/24.04 LTS

Arch Linux (rolling release)

Alpine Linux 3.18+

openSUSE Leap 15.5+ / Tumbleweed

SUSE Linux Enterprise Server (SLES) 15+

macOS 12+ (Monterey and later)

FreeBSD 13+

Windows 10/11/Server 2019+ (where applicable)

bash

# Install EPEL repository if needed
sudo dnf install -y epel-release

# Install zimbra
sudo dnf install -y zimbra perl, sysstat, sqlite

# Enable and start service
sudo systemctl enable --now zimbra

# Configure firewall
sudo firewall-cmd --permanent --add-service=zimbra
sudo firewall-cmd --reload

# Verify installation
zimbra --version || systemctl status zimbra

bash

# Update package index
sudo apt update

# Install zimbra
sudo apt install -y zimbra perl, sysstat, sqlite

# Enable and start service
sudo systemctl enable --now zimbra

# Configure firewall
sudo ufw allow 443/7071

# Verify installation
zimbra --version || systemctl status zimbra

bash

# Install zimbra
sudo pacman -S zimbra

# Enable and start service
sudo systemctl enable --now zimbra

# Verify installation
zimbra --version || systemctl status zimbra

bash

# Install zimbra
apk add --no-cache zimbra

# Enable and start service
rc-update add zimbra default
rc-service zimbra start

# Verify installation
zimbra --version || rc-service zimbra status

bash

# Install zimbra
sudo zypper install -y zimbra perl, sysstat, sqlite

# Enable and start service
sudo systemctl enable --now zimbra

# Configure firewall
sudo firewall-cmd --permanent --add-service=zimbra
sudo firewall-cmd --reload

# Verify installation
zimbra --version || systemctl status zimbra

bash

# Using Homebrew
brew install zimbra

# Start service
brew services start zimbra

# Verify installation
zimbra --version

bash

# Using pkg
pkg install zimbra

# Enable in rc.conf
echo 'zimbra_enable="YES"' >> /etc/rc.conf

# Start service
service zimbra start

# Verify installation
zimbra --version || service zimbra status

powershell

# Using Chocolatey
choco install zimbra

# Or using Scoop
scoop install zimbra

# Verify installation
zimbra --version

bash

# Create configuration directory if needed
sudo mkdir -p /opt/zimbra/conf

# Set up basic configuration
sudo tee /opt/zimbra/conf/zimbra.conf << 'EOF'
# Zimbra Configuration
zimbraMailThreadPoolSize=250
EOF

# Test configuration
sudo zimbra -t || sudo zimbra configtest

# Reload service
sudo systemctl reload zimbra

bash

# Set appropriate permissions
sudo chown -R zimbra:zimbra /opt/zimbra/conf
sudo chmod 750 /opt/zimbra/conf

# Enable security features
# See security section for detailed hardening steps

bash

# Enable service
sudo systemctl enable zimbra

# Start service
sudo systemctl start zimbra

# Stop service
sudo systemctl stop zimbra

# Restart service
sudo systemctl restart zimbra

# Reload configuration
sudo systemctl reload zimbra

# Check status
sudo systemctl status zimbra

# View logs
sudo journalctl -u zimbra -f

bash

# Enable service
rc-update add zimbra default

# Start service
rc-service zimbra start

# Stop service
rc-service zimbra stop

# Restart service
rc-service zimbra restart

# Check status
rc-service zimbra status

bash

# Enable in /etc/rc.conf
echo 'zimbra_enable="YES"' >> /etc/rc.conf

# Start service
service zimbra start

# Stop service
service zimbra stop

# Restart service
service zimbra restart

# Check status
service zimbra status

bash

# Using Homebrew services
brew services start zimbra
brew services stop zimbra
brew services restart zimbra

# Check status
brew services list | grep zimbra

powershell

# Start service
net start zimbra

# Stop service
net stop zimbra

# Using PowerShell
Start-Service zimbra
Stop-Service zimbra
Restart-Service zimbra

# Check status
Get-Service zimbra

bash

# Configure performance settings
cat >> /opt/zimbra/conf/zimbra.conf << 'EOF'
zimbraMailThreadPoolSize=250
EOF

# Apply system tuning
sudo sysctl -w net.core.somaxconn=65535
sudo sysctl -w net.ipv4.tcp_max_syn_backlog=65535

# Restart service
sudo systemctl restart zimbra

bash

# Configure clustering (if supported)
# See official documentation for cluster setup

# Basic load balancing setup example
# Configure multiple instances on different ports

nginx

upstream zimbra_backend {
    server 127.0.0.1:443/7071;
    server 127.0.0.1:{default_port}1 backup;
}

server {
    listen 80;
    server_name zimbra.example.com;
    return 301 https://$server_name$request_uri;
}

server {
    listen 443 ssl http2;
    server_name zimbra.example.com;

    ssl_certificate /etc/ssl/certs/zimbra.example.com.crt;
    ssl_certificate_key /etc/ssl/private/zimbra.example.com.key;

    location / {
        proxy_pass http://zimbra_backend;
        proxy_set_header Host $host;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-Forwarded-Proto $scheme;
        
        # WebSocket support (if needed)
        proxy_http_version 1.1;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection "upgrade";
    }
}

apache

<VirtualHost *:80>
    ServerName zimbra.example.com
    Redirect permanent / https://zimbra.example.com/
</VirtualHost>

<VirtualHost *:443>
    ServerName zimbra.example.com
    
    SSLEngine on
    SSLCertificateFile /etc/ssl/certs/zimbra.example.com.crt
    SSLCertificateKeyFile /etc/ssl/private/zimbra.example.com.key
    
    ProxyRequests Off
    ProxyPreserveHost On
    
    ProxyPass / http://127.0.0.1:443/7071/
    ProxyPassReverse / http://127.0.0.1:443/7071/
    
    # WebSocket support (if needed)
    RewriteEngine on
    RewriteCond %{HTTP:Upgrade} websocket [NC]
    RewriteCond %{HTTP:Connection} upgrade [NC]
    RewriteRule ^/?(.*) "ws://127.0.0.1:443/7071/$1" [P,L]
</VirtualHost>

haproxy

frontend zimbra_frontend
    bind *:80
    bind *:443 ssl crt /etc/ssl/certs/zimbra.pem
    redirect scheme https if !{ ssl_fc }
    default_backend zimbra_backend

backend zimbra_backend
    balance roundrobin
    option httpchk GET /health
    server zimbra1 127.0.0.1:443/7071 check
    server zimbra2 127.0.0.1:{default_port}1 check backup

bash

# Set appropriate permissions
sudo chown -R zimbra:zimbra /opt/zimbra/conf
sudo chmod 750 /opt/zimbra/conf

# Configure firewall
sudo firewall-cmd --permanent --add-service=zimbra
sudo firewall-cmd --reload

# Enable SELinux policies (if applicable)
sudo setsebool -P httpd_can_network_connect on

# Configure fail2ban
sudo tee /etc/fail2ban/jail.d/zimbra.conf << 'EOF'
[zimbra]
enabled = true
port = 443/7071
filter = zimbra
logpath = /opt/zimbra/log/*.log
maxretry = 5
bantime = 3600
EOF

bash

# Generate SSL certificates
sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
    -keyout /etc/ssl/private/zimbra.key \
    -out /etc/ssl/certs/zimbra.crt

# Configure SSL in zimbra
# See official documentation for SSL configuration

PostgreSQL Backend (if applicable)

bash

# Create database and user
sudo -u postgres psql << EOF
CREATE DATABASE zimbra_db;
CREATE USER zimbra_user WITH ENCRYPTED PASSWORD 'secure_password';
GRANT ALL PRIVILEGES ON DATABASE zimbra_db TO zimbra_user;
EOF

# Configure zimbra to use PostgreSQL
# See official documentation for database configuration

bash

# Create database and user
sudo mysql << EOF
CREATE DATABASE zimbra_db;
CREATE USER 'zimbra_user'@'localhost' IDENTIFIED BY 'secure_password';
GRANT ALL PRIVILEGES ON zimbra_db.* TO 'zimbra_user'@'localhost';
FLUSH PRIVILEGES;
EOF

bash

# Kernel parameters
sudo tee -a /etc/sysctl.conf << EOF
net.core.somaxconn = 65535
net.ipv4.tcp_max_syn_backlog = 65535
net.ipv4.ip_local_port_range = 1024 65535
net.core.netdev_max_backlog = 5000
vm.swappiness = 10
EOF

sudo sysctl -p

# Zimbra specific tuning
zimbraMailThreadPoolSize=250

bash

# Configure system limits
sudo tee -a /etc/security/limits.conf << EOF
zimbra soft nofile 65535
zimbra hard nofile 65535
zimbra soft nproc 32768
zimbra hard nproc 32768
EOF

yaml

# prometheus.yml configuration
scrape_configs:
  - job_name: 'zimbra'
    static_configs:
      - targets: ['localhost:443/7071']
    metrics_path: '/metrics'

bash

# Basic health check script
#!/bin/bash
if systemctl is-active --quiet zimbra; then
    echo "Zimbra is running"
    exit 0
else
    echo "Zimbra is not running"
    exit 1
fi

bash

# Configure log rotation
sudo tee /etc/logrotate.d/zimbra << 'EOF'
/opt/zimbra/log/*.log {
    daily
    rotate 14
    compress
    delaycompress
    missingok
    notifempty
    create 0640 zimbra zimbra
    postrotate
        systemctl reload zimbra > /dev/null 2>&1 || true
    endscript
}
EOF

bash

#!/bin/bash
# Zimbra backup script
BACKUP_DIR="/backup/zimbra"
DATE=$(date +%Y%m%d_%H%M%S)

mkdir -p "$BACKUP_DIR"

# Stop service (if required)
systemctl stop zimbra

# Backup configuration
tar -czf "$BACKUP_DIR/zimbra-config-$DATE.tar.gz" /opt/zimbra/conf

# Backup data (adjust paths as needed)
tar -czf "$BACKUP_DIR/zimbra-data-$DATE.tar.gz" /var/lib/zimbra

# Start service
systemctl start zimbra

# Clean old backups (keep 30 days)
find "$BACKUP_DIR" -name "*.tar.gz" -mtime +30 -delete

echo "Backup completed: $BACKUP_DIR"

bash

# Stop service
sudo systemctl stop zimbra

# Restore configuration
sudo tar -xzf /backup/zimbra/zimbra-config-*.tar.gz -C /

# Restore data
sudo tar -xzf /backup/zimbra/zimbra-data-*.tar.gz -C /

# Set permissions
sudo chown -R zimbra:zimbra /opt/zimbra/conf
sudo chown -R zimbra:zimbra /var/lib/zimbra

# Start service
sudo systemctl start zimbra

1. Service won't start:

bash

# Check logs
sudo journalctl -u zimbra -n 100
sudo tail -f /opt/zimbra/log/*.log

# Check configuration
sudo zimbra -t || sudo zimbra configtest

# Check permissions
ls -la /opt/zimbra/conf
ls -la /var/lib/zimbra

2. Connection refused:

bash

# Check if service is listening
sudo ss -tlnp | grep 443/7071
sudo netstat -tlnp | grep 443/7071

# Check firewall
sudo firewall-cmd --list-all
sudo iptables -L -n

# Test connection
telnet localhost 443/7071
nc -zv localhost 443/7071

3. Performance issues:

bash

# Check resource usage
top -p $(pgrep zimbra)
htop -p $(pgrep zimbra)

# Check connections
ss -ant | grep :443/7071 | wc -l

# Monitor I/O
iotop -p $(pgrep zimbra)

bash

# Run in debug mode
sudo zimbra -d
# or
sudo zimbra debug

# Increase log verbosity
# Edit configuration to enable debug logging

yaml

version: '3.8'
services:
  zimbra:
    image: zimbra:latest
    container_name: zimbra
    ports:
      - "443/7071:443/7071"
    volumes:
      - ./config:/opt/zimbra/conf
      - ./data:/var/lib/zimbra
    environment:
      - zimbra_CONFIG=/opt/zimbra/conf/zimbra.conf
    restart: unless-stopped
    networks:
      - zimbra_net

networks:
  zimbra_net:
    driver: bridge

yaml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: zimbra
spec:
  replicas: 3
  selector:
    matchLabels:
      app: zimbra
  template:
    metadata:
      labels:
        app: zimbra
    spec:
      containers:
      - name: zimbra
        image: zimbra:latest
        ports:
        - containerPort: 443/7071
        volumeMounts:
        - name: config
          mountPath: /opt/zimbra/conf
      volumes:
      - name: config
        configMap:
          name: zimbra-config
---
apiVersion: v1
kind: Service
metadata:
  name: zimbra
spec:
  selector:
    app: zimbra
  ports:
  - port: 443/7071
    targetPort: 443/7071
  type: LoadBalancer

yaml

---
- name: Install and configure Zimbra
  hosts: all
  become: yes
  tasks:
    - name: Install zimbra
      package:
        name: zimbra
        state: present
    
    - name: Configure zimbra
      template:
        src: zimbra.conf.j2
        dest: /opt/zimbra/conf/zimbra.conf
        owner: zimbra
        group: zimbra
        mode: '0640'
      notify: restart zimbra
    
    - name: Start and enable zimbra
      systemd:
        name: zimbra
        state: started
        enabled: yes
  
  handlers:
    - name: restart zimbra
      systemd:
        name: zimbra
        state: restarted

Maintenance

bash

# RHEL/CentOS/Rocky/AlmaLinux
sudo dnf update zimbra

# Debian/Ubuntu
sudo apt update && sudo apt upgrade zimbra

# Arch Linux
sudo pacman -Syu zimbra

# Alpine Linux
apk update && apk upgrade zimbra

# openSUSE
sudo zypper update zimbra

# FreeBSD
pkg update && pkg upgrade zimbra

# Always backup before updates
tar -czf /backup/zimbra-pre-update-$(date +%Y%m%d).tar.gz /opt/zimbra/conf

# Restart after updates
sudo systemctl restart zimbra

Regular Maintenance Tasks

bash

# Clean logs
find /opt/zimbra/log -name "*.log" -mtime +30 -delete

# Verify integrity
sudo zimbra --verify || sudo zimbra check

# Update databases (if applicable)
sudo zimbra-update-db

# Optimize performance
sudo zimbra-optimize

# Check for security updates
sudo zimbra --security-check

Official Documentation: https://docs.zimbra.org/

GitHub Repository: https://github.com/zimbra/zimbra

Community Forum: https://forum.zimbra.org/

Wiki: https://wiki.zimbra.org/

Comparison vs Exchange, Kopano, Kolab, Nextcloud: https://docs.zimbra.org/comparison

---

Note: This guide is part of the HowToMgr collection. Always refer to official documentation for the most up-to-date information.

1. Prerequisites

2. Supported Operating Systems

3. Installation

RHEL/CentOS/Rocky Linux/AlmaLinux

Debian/Ubuntu

Arch Linux

Alpine Linux

openSUSE/SLES

macOS

FreeBSD

Windows

Initial Configuration

Basic Configuration

Security Hardening

5. Service Management

systemd (RHEL, Debian, Ubuntu, Arch, openSUSE)

OpenRC (Alpine Linux)

rc.d (FreeBSD)

launchd (macOS)

Windows Service Manager

Advanced Configuration

Performance Optimization

Clustering and High Availability

Reverse Proxy Setup

nginx Configuration

Apache Configuration

HAProxy Configuration

Security Configuration

Basic Security Setup

SSL/TLS Configuration

Database Setup

PostgreSQL Backend (if applicable)

MySQL/MariaDB Backend (if applicable)

Performance Optimization

System Tuning

Resource Limits

Monitoring

Prometheus Integration

Health Checks

Log Monitoring

9. Backup and Restore

Backup Script

Restore Procedure

6. Troubleshooting

Common Issues

Debug Mode

Integration Examples

Docker Compose

Kubernetes Deployment

Ansible Playbook

Maintenance

Update Procedures

Regular Maintenance Tasks

Additional Resources

Related Groupware Guides

Kolab Installation Guide

Kopano Installation Guide